Veteran–Owned • Built by Service Members
Inspection-ready ribbon racks, without the hassle

Magnetic Thin Ribbons by Pin-iT

The next evolution of ribbon racks

Each ribbon is its own magnet — not glued to a plastic bar. Snap every award into place, update one ribbon at a time, and keep your uniform sharp with zero trips back to a builder.

Build Your Magnetic Thin Ribbon Rack See How the Magnets Work

Prefer classic options? Pin-iT also offers traditional slide-on ribbons and one-piece thin ribbon racks — all built on the same rack builder.

Only at Pin-iT Military Uniform Tools • The original Magnetic Thin Ribbons Made for active duty, veterans, honor guards, recruiters, and public service uniforms.
Pin-iT Magnetic Thin Ribbons rack builder preview
Update 1 ribbon at a time
3 Rack Styles Magnetic Thin • Thin • Slide-On
Simple Updates Order only the new ribbon you earn
No Guesswork Online builder corrects order of precedence
How Magnetic Thin Ribbons actually work

Every ribbon is its own magnet — not a glued one-piece rack

Competitors advertise “magnetic ribbon racks,” but their magnets are usually just glued to the back of a plastic strip. Pin-iT does it differently: each individual thin ribbon is wrapped around a super-strong magnet and snaps onto a stainless-steel ribbon bar.

  • 1
    Build your bar once
    Choose bar size, alignment (centered or right), and backing (pin or magnet). This is your base — a flat, ferromagnetic ribbon bar designed for thin ribbons.
  • 2
    Snap in individual magnetic ribbons
    Each ribbon is its own magnet. Add, remove, or rearrange them like puzzle pieces to keep everything aligned and inspection-ready without tools.
  • 3
    Update only what you earn
    When you receive a new award, just order that single magnetic thin ribbon. No shipping your rack back, no buying an entirely new set.
  • 4
    Wear with pins or magnets on the back
    Choose traditional pin-and-clutch backing, or go full no-holes with a magnetic backing plate — perfect for uniform shirts and duty wear.
Each ribbon is a magnet that snaps to the ribbon bar
Magnets work like a puzzle — opposite colors attract and keep your rows locked in. Use Pin-iT’s How-To guide to configure 3-across, 4-across, and mixed-row layouts without crooked gaps.
Choose what works for your uniform

Why service members pick Magnetic Thin Ribbons over one-piece racks

Pin-iT is the only builder where you can choose between Magnetic Thin Ribbons, classic thin ribbons, and traditional slide-on racks — all from one veteran-owned shop.

Best Overall

Magnetic Thin Ribbons (Pin-iT Magic Rack)

The look and profile of thin ribbons with the flexibility of slide-ons — plus the power of magnets.

  • Each ribbon is its own magnet — not glued to plastic.
  • Update your rack one ribbon at a time.
  • Secure hold, even during duty, drills, and ceremonies.
  • Works with pin or magnetic backing on the bar.
  • Perfect for service dress, shirt-only uniforms, and public service racks.

Best for: service members who want the cleanest modern look and fast, affordable updates.

Traditional Thin Ribbon Racks

Low-profile one-piece racks for a modern, flush look on your uniform.

  • Lightweight, thin, and sharp for inspections and formal events.
  • Built as a single rack for a super-clean presentation.
  • Great upgrade from PX / exchange ribbon bars.
  • Available for multiple services and public safety ribbons.

Best for: dress occasions where you prefer a slim, one-piece thin ribbon rack.

Classic Slide-On Ribbons

The familiar rack style found at your base exchange, built with Pin-iT precision.

  • Uses standard slide-on ribbons and ribbon bars.
  • Easy to understand and replace for long-time users.
  • Works with Pin-iT Cards and measuring tools for perfect alignment.
  • Great option if your unit requires traditional slide-ons.

Best for: those who want to stay 100% classic while still using a pro builder.

All three options are available from Pin-iT: Magnetic Thin Ribbon Rack Thin Ribbon Rack Slide-On Ribbon Rack Police • Fire • EMS • Military
Built by someone who wore the uniform

Designed by veterans who were tired of crooked, hard-to-update racks

Pin-iT’s founder spent years in uniform and years perfecting Magnetic Thin Ribbons. The result: a system that respects regulations, saves you time, and keeps every ribbon locked in place — without destroying your shirts.

Veteran-Owned & Operated Only source for true Magnetic Thin Ribbons Used by military & public safety
  • ✔ Magnetic Thin Ribbons that behave like slide-ons — removable and replaceable.
  • ✔ Online builder corrects order of precedence for you.
  • ✔ Update only the award you earn — stop rebuying entire racks.
  • ✔ Backed by Pin-iT’s full line of uniform tools, measuring cards, and travel cases.
Visit the Full Pin-iT Ribbon Rack Builder
Three easy steps

Go from “boxes of ribbons” to a clean rack in minutes

1. Choose your rack type Magnetic Thin Ribbons for maximum flexibility, or stick with thin / slide-on racks if your unit prefers them.
2. Build online Use the builder to select branch, alignment, bar size, backing, and every ribbon & device you rate.
3. Wear with confidence Your rack arrives aligned, low-profile, and ready for inspection — with an easy path to future updates.
Magnetic Thin Ribbons clean uniform look

Ready to upgrade your ribbon rack?

Whether you choose Magnetic Thin Ribbons, thin ribbons, or traditional slide-on racks, Pin-iT gives you a sharper, smarter way to display your service.

Start with Magnetic Thin Ribbons Build a Thin Ribbon Rack

Frequently Asked Questions

Magnetic Thin Ribbons are low-profile ribbons wrapped around individual magnets that snap onto a steel bar. They deliver a clean thin-rack appearance while letting you update one ribbon at a time without rebuilding the entire rack.
Yes. When built correctly in accordance with branch uniform manuals, Magnetic Thin Ribbons follow official order-of-precedence, spacing, and device requirements for military and public service uniforms.
Each ribbon contains a magnet that locks onto a ferromagnetic backing bar. The bar itself can use traditional pin-and-clutch hardware or a magnetic backing plate depending on user preference.
Magnetic Thin Ribbons allow individual updates. Thin Ribbon Racks are one-piece thin blocks that sit very flat but require rebuilding when updating. Slide-On Ribbons are the classic exchange style that slide onto a metal bar.
No. The magnets never touch the uniform directly. Magnetic Thin Ribbons attach to the metal bar, and the bar attaches to the uniform using either pins or an optional backing magnet behind the shirt.
Absolutely. This is the main benefit of Magnetic Thin Ribbons. You can reorder any ribbon individually and snap it into place without rebuilding the entire rack.
Magnetic Thin Ribbons are ideal if you expect updates or want maximum flexibility. Thin Racks are best for boards, inspections, and formal events. Slide-Ons are great if your unit prefers traditional racks or you’re matching older bars.
Yes. Pin-iT is veteran-owned and built by people who have worn the uniform. All racks are designed for accuracy, alignment, and long-term durability.
Scroll to Top